Himalayan Pink Salt Tiles 8" x 4" x 1" - Pack of 50

Himalayan Pink Salt Tiles 8" x 4" x 1" (Pack of 50)

This contractor pack of 50 Himalayan pink salt tiles covers 11.1 square feet and weighs about 125 pounds total, enough to face a full room-scale wall or several coordinated features. Each tile is 8" x 4" x 1", batch-matched, and cut from the Khewra Salt Mine in Punjab, Pakistan. At about $5.80 per tile, it is the lowest per-tile price in the tile range, shipped palletized as one consignment.

Fifty tiles is a jobsite order. Coverage, adhesive volume, lighting runs, structural load, and freight all matter, so the numbers below let a contractor or facility owner spec the whole project before ordering.

How much wall does a pack of 50 cover?

Fifty tiles cover 1,600 square inches, or 11.1 square feet, with each tile covering 32 square inches. The standard layout is a 10x5 grid at 80" wide by 20" tall. You can also split the pack into two 5x5 squares at 20" x 20" each, or wrap a room corner to corner. Here is the coverage at a glance.

From our workshop: on room-scale jobs, dry-lay the entire pack on the floor in grid order before a single tile goes up. Natural salt varies in tone tile to tile even within one batch, and laying it out first lets you place the deepest-colored pieces where the light hits hardest. It adds an hour and saves a patchy-looking wall.

How much adhesive and lighting does a 50-tile job need?

For 50 tiles, plan on 8 to 10 tubes of pink salt adhesive, since one tube bonds about 5 to 6 tiles. For full backlighting behind an 80" x 20" grid, plan 200 to 300 inches of warm-white LED strip at 2700K to 3000K, usually across multiple transformers or a controller. A permanent lighting run at this scale often needs a licensed electrician.

• Adhesive: 8 to 10 tubes of salt-bonding adhesive for 50 tiles.
• Lighting: 200 to 300 inches of LED strip, 2700K to 3000K, dimmable.
• Tools: 6-foot or laser level, stud finder, tape measure, multiple trowels.

How does a 125-pound order ship?

A 50-tile pack ships palletized and shrink-wrapped by freight, not standard parcel, because of the 125-pound weight and fragility of natural salt. Plan for a delivery appointment and a way to move the pallet on site. Freight lines do not deliver to PO boxes, and shipping is not available to Hawaii, Alaska, or Puerto Rico.

How do you install a room-scale salt wall?

Budget 10 to 15 hours across two or three days, and treat structure first. Confirm the wall can carry 125 pounds into studs, set a laser-level baseline, then build in courses from a dead-level bottom row. Work in sections, keep spare tiles for chipped edges, and cure the finished wall 48 to 72 hours before adding light or heat.

1. Verify structural support and locate studs across the full grid width.
2. Snap a laser-level baseline and tape out the complete layout.
3. Mount and test all LED runs 1 to 2 inches behind the tile plane.
4. Set a perfectly level bottom row, then build upward in courses.
5. Spread thin adhesive per tile, press 30 seconds, check level constantly.
6. Wipe squeeze-out immediately, then cure 48 to 72 hours before lighting.

Common mistakes on a commercial install

At 50 tiles, the costly errors are structural and logistical. Mounting to drywall without stud backing, ordering exact count with no spares, and skipping the dry-lay. Any one of them turns a premium wall into a callback.

• Load into studs. 125 pounds on drywall alone will not hold long term.
• Keep 3 to 5 spare tiles. Edge chips are normal on a freight pallet.
• Dry-lay the grid first to balance color before bonding anything.

Pack specifications

Bulk pricing across packs

The 50-pack carries the lowest per-tile price in the tile range. If you're speccing a large or repeat job, here is where it sits against the smaller packs.

Care and quality

Dust the wall with a dry microfiber cloth on a regular schedule, which for a business is worth building into a weekly cleaning routine. Skip liquid cleaners, since water dissolves salt, and keep the panel out of direct water spray. Expect minor surface dampness in humid conditions, which wipes off dry. Every tile is inspected for cracks and color-matched to the batch, then palletized for protected freight delivery.

A pack of 50 Himalayan salt tiles covers 11.1 square feet and ships palletized by freight, using 8 to 10 tubes of salt adhesive and 200 to 300 inches of warm-white LED strip for a fully backlit room-scale wall.

Key takeaways

• Fifty batch-matched tiles, about 2.5 lb each and 125 lb total, from Khewra rock salt.
• Covers 11.1 square feet, an 80" x 20" grid in the standard 10x5 layout.
• Ships palletized by freight, so plan a delivery appointment and on-site handling.
• Plan 8 to 10 tubes of adhesive and 200 to 300 inches of warm-white LED strip.
• Load into studs, dry-lay for color, and keep spares. Lowest per-tile price in the range.