Himalayan Pink Salt Tiles 8" x 4" x 1" - Pack of 100

Himalayan Pink Salt Tiles 8" x 4" x 1" (Pack of 100)

This pack of 100 Himalayan pink salt tiles covers 22.22 square feet and weighs about 250 pounds total, enough to wrap all four walls of a small room or face four to five separate spaces. Each tile is 8" x 4" x 1", batch-matched, and cut from the Khewra Salt Mine in Punjab, Pakistan. It is the top of the standard retail range before quote-based bulk orders.

One hundred tiles is a full-facility order. Coverage, adhesive volume, lighting runs, structural load, and freight logistics all matter at this scale, so the numbers below let a builder or facility owner spec the whole job before ordering.

How much wall does a pack of 100 cover?

One hundred tiles cover 3,200 square inches, or 22.22 square feet, with each tile covering 32 square inches. The standard layout is a 10x10 grid at 80" wide by 40" tall. At this quantity you can wrap all four walls of a small therapy room, or split the pack into features across several rooms. Here is the coverage at a glance.

From our workshop: on a 100-tile job, order the adhesive and lighting in one go with the tiles, not after they arrive. Once a 250-pound pallet lands, crews want to start. We've seen installs stall for a week because the salt was on site but the adhesive count was short. Match materials to the plan before the freight ships.

How much adhesive and lighting does a 100-tile job need?

For 100 tiles, plan on 17 to 20 tubes of pink salt adhesive, since one tube bonds about 5 to 6 tiles. For full backlighting behind a 10x10 grid, plan 400 to 480 inches of warm-white LED strip at 2700K to 3000K, across multiple transformers or a lighting controller. A permanent commercial run at this scale should be wired by a licensed electrician.

• Adhesive: 17 to 20 tubes of salt-bonding adhesive for 100 tiles.
• Lighting: 400 to 480 inches of LED strip, 2700K to 3000K, dimmable.
• Tools: laser level, stud finder, multiple trowels, spacers, drop cloths.

How does a 250-pound order ship?

A 100-tile pack ships palletized and shrink-wrapped by freight, not standard parcel, because of the 250-pound weight and the fragility of natural salt. Plan for a delivery appointment, a way to move the pallet, and space to stage it near the install. Freight does not deliver to PO boxes, and shipping is not available to Hawaii, Alaska, or Puerto Rico.

How do you install a full-room salt project?

Budget three to five days and treat structure and staging first. Confirm every wall can carry its load into studs, snap laser-level baselines, then build each wall in courses from a dead-level bottom row. Blend tiles across cartons for even color, keep spares for chipped edges, and cure each wall 48 to 72 hours before adding light or heat.

1. Verify structural support and locate studs on every wall in the plan.
2. Stage the pallet near the room and blend tiles across cartons.
3. Snap laser-level baselines and tape out each wall's layout.
4. Mount and test all LED runs 1 to 2 inches behind the tile plane.
5. Set level bottom rows, spread thin adhesive per tile, press 30 seconds.
6. Build in courses, wipe squeeze-out, then cure 48 to 72 hours before lighting.

Is the 100-pack the best value in the standard range?

At about $5.72 per tile, the 100-pack sits near the lowest per-tile price you can order without a custom quote. It also arrives as a single freight pallet instead of several deliveries, and one batch keeps color consistent across a whole room. For larger jobs, the 150 and up packs move to quote-based pricing. Here is how it compares.

Common mistakes on a full-facility install

At 100 tiles, the costly errors are logistical: short adhesive, no staging space, and unblended cartons that leave rooms mismatched. Plan materials and space before the pallet arrives.

• Order adhesive and lighting with the tiles, not after delivery.
• Blend tiles across cartons so every wall and room matches in tone.
• Keep 6 to 8 spare tiles. Edge chips are normal on a freight pallet.

Pack specifications

Related tile packs

Choosing your quantity? Compare the neighbors in the range:

• Pack of 50 for an 11.1 sq ft room-scale wall.
• Pack of 70 for two coordinated rooms.
• Pack of 150 for larger facilities on quote-based pricing.

Care and quality

Dust the walls with a dry microfiber cloth on a set schedule, and for a commercial space, build it into the cleaning routine and brief the staff. Skip liquid cleaners, since water dissolves salt, and keep the panels off direct water spray. Minor surface dampness in humid conditions is normal and wipes off dry. Every tile is inspected for cracks and color-matched to the batch, then palletized for protected freight delivery.

A pack of 100 Himalayan salt tiles covers 22.22 square feet, enough to wrap a full small room, and ships as a single 250-pound freight pallet.

Key takeaways

• One hundred batch-matched tiles, about 2.5 lb each and 250 lb total, from Khewra rock salt.
• Covers 22.22 square feet, enough for a full four-wall room or four to five features.
• Top of the standard retail range before quote-based bulk orders.
• Ships palletized by freight. Plan 17 to 20 tubes of adhesive and 400 to 480 inches of LED strip.
• Order materials with the tiles and blend cartons so every wall matches.